End Caps - End Pieces

Stainless steel barrel tube end caps do not fade or chip making them ideal for long lasting, stronger jewelry designs. Inside hole is 3mm. Note: Manufacturer package shows 4.5mm by 8mm but we measured 4mm by 10mm. 10 pieces per package.

Stainless steel barrel tube end caps do not fade or chip making them ideal for long lasting, stronger jewelry designs. Note: Manufacturer package shows 5.5mm by 10mm but we measured 6mm by 10mm. 8 pieces per package.

Stainless steel barrel tube end caps do not fade or chip making them ideal for long lasting, stronger jewelry designs. Each cord end cap measures approximately 8mm wide by 12mm long. 6 pieces per package.

Metal bead cones are perfect for creating a finished end to your jewelry piece. Use as cord end caps to hide your knot or to make it easier to grasp. Each bead cone is 1/2" long, bottom of cone is 1/4" wide, silver plated, metal end cones. 8 pieces per package.

Also known as bead tips, bead tip fold overs or calottes. These double cup connectors are perfect for hiding and protecting knots while also providing a secure connection to jump rings, clasps, and other jewelry findings.

Also known as bead tips, bead tip fold overs or calottes. These double cup connectors are perfect for hiding and protecting knots while also providing a secure connection to jump rings, clasps, and other jewelry findings.

Also known as bead tips, bead tip fold overs or calottes. These double cup connectors are perfect for hiding and protecting knots while also providing a secure connection to jump rings, clasps, and other jewelry findings.

Also known as bead tips, bead tip fold overs or calottes. These double cup connectors are perfect for hiding and protecting knots while also providing a secure connection to jump rings, clasps, and other jewelry findings.

Rectangular, gold end caps measuring 4 x 9mm with inside measurement of 3 x 5mm. 26 pieces per package.

Rectangular, silver end caps measuring 4 x 9mm with inside measurement of 3 x 5mm. 22 pieces per package.

Big Value! Silver rectangle end caps. 120 pieces per package.

10mm, silver, end connectors. 10 pieces per package.
* OUT OF STOCK 

Also known as bead tips, bead tip fold overs or calottes. These double cup connectors are perfect for hiding and protecting knots while also providing a secure connection to jump rings, clasps, and other jewelry findings.

Add the finishing, professional touch to your design with End Caps. End Caps are open on one side to accomodate the memory wire end. Use end caps with rings to dangle charms or just about anything to add to your design.

Add the finishing, professional touch to your design with End Caps. End Caps are open on one side to accomodate the memory wire end. Use end caps with rings to dangle charms or just about anything to add to your design.

Add the finishing, professional touch to your design with End Caps. End Caps are open on one side to accomodate the memory wire end. Use end caps with rings to dangle charms or just about anything to add to your design.

Give your seed bead designs a luxurious yet secure finishing touch with these end tubes. Finish off seed bead projects with these tube ends. Simply insert end of seed bead project into opening and gently squeeze together with a pair of pliers and bend sides. Measures 15 mm wide. Click on the alternate photo for an example of this tube being used.

Finish off seed bead woven projects with these tube ends. Simply insert end of woven project into opening and gently pinch with a pair of pliers and bend sides. Measures 15 mm wide. Give your seed bead designs a luxurious yet secure finishing touch with these end tubes.

Give your seed bead designs a luxurious yet secure finishing touch with these end tubes. Finish off seed bead projects with these tube ends. Simply insert end of seed bead project into opening and gently pinch with a pair of pliers and bend sides. Measures 20 mm wide. Click on the alternate photo for an example of this tube being used.

Give your seed bead designs a luxurious yet secure finishing touch with these end tubes. Finish off seed bead projects with these tube ends. Simply insert end of seed bead project into opening and gently pinch with a pair of pliers and bend sides. Measures 20 mm wide. Click on the alternate photo for an example of this tube being used.

Gives your seed bead designs a luxurious yet secure finishing touch with these end tubes. Finish off seed bead projects with these tube ends. Simply insert end of seed bead project into opening and gently pinch with a pair of pliers and bend sides. Measures 20 mm wide. Click on the alternate photo for an example of this tube being used.

Can be used for all types of cords, leather necklaces, Kumihimo bracelets, etc. Measures approx 14 mm including the top loop. Loop measures 6mm wide on outside and 3mm wide inside. The cord closure is approx 8mm long. For use with 3-6mm cords.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 9 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 8mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 12 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 10mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 12 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 10mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 16 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 13mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 16 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 16mm wide, 7mm tall (without connector hole) and 9mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 21 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 20mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole. Goldtone

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 21 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 20mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature smooth, non-textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 16 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends.
* New Item! 

These ribbon end fastener clamp feature smooth, non-textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 16 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 16mm wide, 8mm tall (without connector hole) and 11mm tall with connector hole.